[1] Jiang Yang*, Honggang Dong, Peng Li, et al. Analysis of microstructural evolution and mechanical properties in the simulated heat-affected zone of Fe-23Mn-0.45C-1.5Al high-Mn austenitic steel. Journal of Materials Research and Technology, 2022, 20: 1110-1126.
[2] Jiang Yang, Honggang Dong*, Yueqing Xia, et al. Precipitation behavior of carbides and cryogenic toughness in heat-affected zone of high-Mn twinning-induced plasticity steel welded joint. Journal of Manufacturing Processes, 2021, 68: 716-727.
[3] Jiang Yang, Honggang Dong*, Yueqing Xia, et al. The microstructure and mechanical properties of novel cryogenic twinning-induced plasticity steel welded joint. Materials Science and Engineering: A, 2021, 818: 141449.
[4] Jiang Yang, Honggang Dong*, Yueqing Xia, et al. Carbide precipitates and mechanical properties of medium Mn steel joint with metal inert gas welding. Journal of Materials Science & Technology, 2020, 75: 48-58.
[5] Honggang Dong*, Jiang Yang, Yueqing Xia, et al. Effect of Cr content in Ni-based amorphous filler on microstructure and shear strength of K4169 nickel-based alloy brazed joint. Journal of Materials Processing Technology, 2020, 290: 116975.
[6] Honggang Dong*, Jiang Yang, Yanguang Li, et al. Evolution of interface and tensile properties in 5052 aluminum alloy/304 stainless steel rotary friction welded joint after post-weld heat treatment. Journal of Manufacturing Processes, 2020, 51: 142-150.
[7] Quan Chen, Jiang Yang, Xinghui Liu, et al. Effect of the groove type when considering a thermometallurgical-mechanical model of the welding residual stress and deformation in an S355JR-316L dissimilar welded joint. Journal of Manufacturing Processes, 2019, 45: 290-303.
[8] Bensheng Huang, Jiang Yang*, Donghua Lu, et al. Study on the microstructure, mechanical properties and corrosion behaviour of S355JR/316L dissimilar welded joint prepared by gas tungsten arc welding multi-pass welding process. Science and Technology of Welding and Joining, 2016, 21(5): 381-388.
[9] 黄本生, 陈权, 杨江, 等. Q345/316L 异种钢焊接残余应力与变形数值模拟. 焊接学报, 2019, 40(2): 138-144.
