柴林江

姓名: 柴林江
性别:
所在系所: 材料成型及控制工程系
研究方向: 材料科学与工程
职称: 副教授

学习与工作简历

2014/01 – 现在,重庆理工大学,材料科学与工程学院,材料工程系,讲师/副教授

2012/09 – 2013/09,美国North Carolina State University,核工程系,联合培养博士;

2008/09 – 2013/12,重庆大学,材料科学与工程学院,材料加工工程系,博士(硕博连读);

2004/09 – 2008/07,重庆大学,机械工程学院,材料成型及控制工程系,学士(保送研究生);

研究方向

金属材料的相变晶体学与动力学、塑性变形及再结晶机制、高能束表面改性研究;先进微观组织/织构表征分析技术。

讲授主要课程

研究生:材料工程领域专业英语

本科生:材料成型专业英语、材料成形原理、材料成型技术基础

研究成果(项目、论文、论著、教材、专利等)

科研项目:

主持国家自然科学基金项目1项、中国博士后科学基金面上资助1项、重庆市博士后特别资助(一等)1项、重庆市教委科学技术研究项目1项;主研国家级和省部级科研项目10余项。

科研成果:

在Acta Materialia等高水平学术期刊上以第一作者或通讯作者身份发表SCI论文18篇(二区以上11篇);申请发明专利十余项。

部分代表性论文(*通讯作者):

[1] L. Chai, B. Luan*, K.L. Murty, Q. Liu*, Effect of predeformation on microstructural evolution of a Zr alloy during 550-700°C aging after β quenching, Acta Materialia, 61 (2013) 3099-3109. (SCI一区,IF=4.4)

[2] B.F. Luan, L.J. Chai, G.L. Wu, H.B. Yu, J.W. Chen, Q. Liu*, Twinning during β → α slow cooling in a zirconium alloy, Scripta Materialia, 67 (2012) 716-719. (导师第一作者,SCI一区,IF=3.2)

[3] L. Chai, B. Luan*, D. Xiao, M. Zhang, K.L. Murty, Q. Liu, Microstructural and textural evolution of commercially pure Zr sheet rolled at room and liquid nitrogen temperatures, Materials & Design, 85 (2015) 296-308. (SCI二区,IF=3.5)

[4] L. Chai*, B. Chen, S. Wang, N. Guo, C. Huang, Z. Zhou, W. Huang, Microstructural changes of Zr702 induced by pulsed laser surface treatment, Applied Surface Science, 364 (2016) 61-68. (SCI二区,IF=2.7)

[5] L. Chai*, B. Chen, Z. Zhou, K.L. Murty, Y. Ma, W. Huang, A special twin relationship or a common Burgers misorientation between α plates after β quenching in Zr alloy?, Materials Characterization, 104 (2015) 61-65. (SCI二区,IF=1.8)

[6] W. Huang, L. Chai*, Z. Li, X. Yang, N. Guo, B Song, Evolution of microstructure and grain boundary character distribution of a tin bronze annealed at different temperatures, Materials Characterization, 2016, doi:10.1016/j.matchar.2016.02.022. (SCI二区,IF=1.8)

[7] L. Chai*, B. Chen, S. Wang, Z. Zhou, W. Huang, Microstructural characteristics of a commercially pure Zr treated by pulsed laser at different powers, Materials Characterization, 110 (2015) 25-32. (SCI二区,IF=1.8)

[8] L. Chai, B. Luan*, M. Zhang, K.L. Murty, Q. Liu*, Experimental observation of 12 α variants inherited from one β grain in a Zr alloy, Journal of Nuclear Materials, 440 (2013) 377-381. (SCI二区,IF=1.8)

[9] L. Chai, B. Luan*, K.L. Murty, Q. Liu*, Twinning during recrystallization cooling in α-Zr alloy, Materials Science and Engineering A, 576 (2013) 320-325. (SCI二区,IF=2.5)

[10] L.J. Chai, B.F. Luan*, S.S. Gao, J.W. Chen, Q. Liu, Study of precipitate evolution and recrystallization of β-quenched Zr-Sn-Nb-Fe-Cr-Cu alloy during aging, Journal of Nuclear Materials, 427 (2012) 274-281. (SCI二区,IF=1.8)

[11] B.F. Luan*, L.J. Chai, J.W. Chen, M. Zhang, Q. Liu, Growth behavior study of second phase particles in a Zr-Sn-Nb-Fe-Cr-Cu alloy, Journal of Nuclear Materials, 423 (2012) 127-131. (导师第一作者,SCI二区,IF=1.8)

[12] L. Chai, B. Chen, B. Luan*, Q. Liu, Electron backscatter diffraction investigation of duplex-phase microstructure in a forged Zr-2.5Nb alloy, Science China Technological Sciences, 2016, DOI: 10.1007/s11431-016-6019-0. (SCI三区,IF=1.2)

[13] L.J. Chai, Z.M. Zhou*, Z.P. Xiao, J. Tu, Y.P. Wang, W.J. Huang, Evolution of surface microstructure of Cu-50Cr alloy treated by high current pulsed electron beam, Science China Technological Sciences, 58 (2015) 462-469. (SCI三区,IF=1.2)

[14] L. Chai, B. Luan*, J. Chen, J. Zhou, Q. Liu, Effect of cooling rate on β → α transformation during quenching of a Zr-0.85Sn-0.4Nb-0.4Fe-0.1Cr-0.05Cu alloy, Science China Technological Sciences, 55 (2012) 2960-2964. (SCI三区,IF=1.2)

参加学术团体、任何职务

荣誉和奖励

2015年重庆市优秀博士学位论文;

2015年重庆大学优秀博士论文;

2014年重庆理工大学“青年英才”;

2012年教育部“博士研究生学术新人奖”;

其他

重庆理工大学“材料表(界)面科学与工程”创新团队成员

阅读次数: